Sartec Photoelectronics Contact Us

SR1406 UV Tube Flame Sensor — R9533 Replacement Evaluation

UV Tube Flame Sensor

SR1406 UV Tube Flame Sensor — R9533 Replacement Evaluation

Sartec Photoelectronics offers the SR1406 UV tube flame sensor for flame and discharge detection projects. The published Sartec catalog lists Hamamatsu R9533 as a reference model. Use that reference to begin a model-specific engineering evaluation; it does not establish a verified drop-in replacement or approval for a complete flame detection system.

R9533 evaluation reference 185–260 nm in published catalog 350 ± 25 V in published catalog Confirm circuit and controller
Need a precise match check? Send your existing controller or amplifier model and application details to verify compatibility.
SR1406 UV tube flame sensor for R9533 replacement evaluation
Evaluation Reference
Hamamatsu R9533
Sensor Type
UV Tube Flame Sensor
UV Response
185–260 nm
Typical Use
Burners / Boilers / Safety Systems
Reference Model for Evaluation
Hamamatsu R9533
Sensor Type
UV Tube Flame Sensor
Typical Applications
Industrial Burners, Boilers, Flame Safety Systems
Support
Compatibility Verification & OEM Supply Support

Key Features

  • Published catalog includes a dedicated SR1406 section and a mechanical drawing.
  • The catalog lists a 185–260 nm spectral response range.
  • The catalog lists a 350 ± 25 V operating voltage. Confirm the current model revision and driving circuit before specifying the component.
  • R9533 is an evaluation reference; electrical, mechanical and application suitability requires documented review.

Typical Applications

The catalog identifies flame and discharge detection applications, including burner combustion monitoring and industrial UV monitoring. Suitability for a particular installation depends on the complete sensing circuit, optical path, mounting and controller.

Technical Overview

Source: the SR1406 section on PDF page 4 (printed page 5) of the linked Sartec catalog. The file URL contains 2026, while its contents page says “SarTEC Product Catalog 2025”. These are attributed catalog values; confirm the current datasheet revision before circuit design or ordering. Do not apply SR1406i or another model’s specifications to SR1406. This section does not provide verified absolute maximum limits or complete drive-circuit requirements.

Published SR1406 Catalog Values

ParameterValue
ModelSR1406
Spectral response range185–260 nm
Operating voltage350 ± 25 V
Reference model for evaluationHamamatsu R9533

R9533 Replacement Evaluation Checklist

Compare the exact original R9533 revision and its manufacturer documentation with the current SR1406 datasheet. The reference listing alone does not prove equal sensitivity, lifetime, pinout or controller compatibility.

Review areaRequired comparison
ElectricalCompare operating voltage, current limits, start and sustaining behavior, and quenching requirements.
MechanicalCompare the model-specific drawing, leads, socket, orientation and installation clearances.
Optical and systemCheck spectral response, viewing geometry, controller signal behavior and required flame tests.
AcceptanceRecord the application, revisions, any adaptations and sample-validation results before approving replacement.

FAQs

Can SR1406 be evaluated as an alternative to Hamamatsu R9533?
Yes. The published Sartec catalog lists R9533 as a reference for SR1406. This supports an evaluation starting point, not a verified drop-in replacement. Compare current electrical specifications, pinout, dimensions, driving circuit and controller requirements, then validate samples in the intended application.
Where is the SR1406 UV tube flame sensor used?
The published catalog describes flame and discharge detection, burner combustion monitoring and industrial UV monitoring applications. Confirm suitability against the actual circuit, optical path, mounting and operating conditions.
Can Sartec Photoelectronics help with cross-reference selection?
Send the original model and revision, controller or amplifier model, supply voltage, mounting drawing or photos, application conditions and quantity required. Sartec Photoelectronics can support a model-specific comparison and request the appropriate technical documents.

Related Model and Engineering Resources

Technical Support

Request an R9533 replacement evaluation

Request a model-specific replacement evaluation. Send the original model and revision, controller or amplifier, supply voltage, drawing or photos, application conditions and required quantity.

Engineering Review

R9533 Replacement Evaluation — Engineering Review

Concise selection notes for engineers, buyers, and maintenance teams before sampling or replacement review.

01

Compare the exact original R9533 revision and its manufacturer documentation with the current SR1406 datasheet. The reference listing alone does not prove equal sensitivity, lifetime, pinout or controller compatibility.

02

When evaluating R9533 replacement evaluation, check the target model, mounting condition, electrical interface, response characteristics, operating temperature, amplifier compatibility, and the extent of electrical or mechanical adaptation required by the application.