SRA2M UV Flame Detector
Sartec Photoelectronics lists the SRA2M as a candidate for Siemens QRA2M replacement evaluation in burner flame supervision. Confirm the original detector and control system before selecting a replacement.
Key Features
- UV detection for gas and oil flame supervision
- Used with a suitable combustion controller
- Dimensions and environmental limits are listed in the Sartec catalog
Typical Applications
- Gas burners and industrial boilers
- Oil burners and industrial heating systems, subject to system review
- Burner projects requiring an exact-model detector evaluation
System Overview
Identify the exact burner controller, amplifier or adapter and operating mode. The illustration shows a general signal chain. Controller compatibility and the required flame signal must be verified for the installation.
Siemens QRA2M Compatibility Review
Siemens lists QRA2 as the normal-sensitivity model and QRA2M as the high-sensitivity model. Its QRA detector datasheet (CC1N7712en) lists the QRA2M for intermittent operation with specified burner controls. The Sartec catalog lists SRA2M specifically for QRA2M evaluation.
Compare the exact model and suffix, controller and amplifier, operating mode, wiring and signal interface, mounting dimensions, sightline and site conditions. Have qualified personnel verify the flame signal and applicable burner safety checks under the equipment manufacturer's procedures before service.
Specifications
- Operating temperature: −20 to +60 °C
- Humidity: <95%
- Protection rating: IP40
- Weight: 60 g
FAQ – SRA2M UV Flame Detector
Is SRA2M an option for a Siemens QRA2M application?
Sartec lists SRA2M for QRA2M replacement evaluation. Verify the exact detector, control system and installation before use.
What is the difference between Siemens QRA2 and QRA2M?
Siemens specifies normal sensitivity for QRA2 and high sensitivity for QRA2M. Confirm the exact model on the original detector label before requesting a comparison.
What information is needed for a compatibility review?
Provide the detector part number and suffix, controller and amplifier models, operating mode, wiring details, mounting dimensions and operating conditions.
What should be verified before commissioning?
Qualified personnel should follow the equipment manufacturer's procedures to check detector compatibility, flame signal and burner safety functions.
Related Categories
Get a Quote / Request Model Confirmation
Send the original detector label, controller and amplifier models, wiring details, and mounting photos to request a QRA2M replacement evaluation.
SRA2M Engineering Review
Concise selection notes for engineers, buyers, and maintenance teams before sampling or replacement review.
Photograph the original detector label and record the burner controller and amplifier or adapter part numbers.
Share the mounting drawing, sightline and application conditions with the engineering team before requesting an evaluation sample.
Related resources include UV flame detectors, CHECK LIGHT UV flame sensors, and engineering support.
UV flame detector selection resources: compare UV flame detectors, review industrial flame detection applications, access datasheets and technical documents, or request an engineering review.